For cable drag chain

  1. About power cables, the space is no less than 10% will be left, and for water pipes, no less than 20% will be left for the space.
  2. The drag chain is very good at avoiding putting cables to reduce wear and tear.
  3. The cable drag chain can separate the cables separately, to prevent the cables from overlaping.
  4. It can be arranged that the cables symmetrically according to their weight and size, placing the heavy and large cables on both sides, and placing the light and small cables in the middle.
  5. Calculate the cable travel as stroke of the cable for running length.
  6. It will be relied on the diameter of the cable, model, and width for the height of the drag chain support plate.
  7. It will be depended on weight of the cable for the sufficient load-bearing capacity of the cable drag chain.

Die Merkmale von Schleppketten:

  1. Bei der Verwendung in der Hin- und Herbewegung kann es Traktion und Schutz für eingebaute Kabel, Ölleitungen, Luftleitungen, Wasserleitungen usw. bieten.
  2. Jeder Abschnitt der Schleppkette kann zur Installation und Wartung leicht geöffnet werden. Sie ist geräuscharm während der Bewegung, verschleißfest und kann sich mit hoher Geschwindigkeit bewegen
  3. Die Schleppkette ist weit verbreitet in CNC-Drehbänken, elektronischen Geräten, Steinmaschinen, Glasmaschinen, Tür- und Fenstermaschinen, Spritzgussmaschinen, Roboterarmen, Hebe- und Transportgeräten, automatisierten Lagern usw.

The structure of the drag chain:

  1. Same inner height, outer height, and same pitch can be in same series. Although there is different choose of the inner height, bending radius R.
  2. The unit chain link consists of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened, making it easy to assemble and disassemble without the need for threading. After opening the cover plate, cables, oil pipes, gas pipes, etc. can be placed into the drag chain
  3. Dividers can also be provided to separate the space inside the drag chain as needed

Basic parameters of drag chains:

  1. Material: Reinforced nylon, with high pressure and tensile load, good toughness, high elasticity, wear resistance, flame retardant. Stable performance at high and low temperatures, suitable for outdoor use
  2. Resistance: It is resistant to oil and salt, and has certain acid and alkali resistance
  3. Operating speed and acceleration: The maximum speed can reach 5 meters/second, and the maximum acceleration can reach 5 meters/second… ² (specific speed and acceleration depend on operating conditions)
  4. Operating life: Under normal overhead use, it can reach 5 million reciprocating movements (specific life depends on operating conditions)

The selection principle of drag chains:

  1. Internal height: Select the thickest cable, oil pipe, gas pipe, water pipe, etc. as the reference height, and add at least 10% of the height space as the internal height of the drag chain. If there is overlap, the actual height after overlapping will be used as the reference height
  2. Inner width: Select thicker cables, oil pipes, gas pipes, water pipes, etc., and use the sum of their outer diameters as a reference for the inner width of the drag chain, leaving at least 10% of the width space
  3. Bending radius: Select the maximum bending radius among built-in cables, oil pipes, air pipes, water pipes, etc. as the reference value, and leave more than 10% of the space

The principle for placing cables, oil pipes, water pipes, and air pipes inside the drag chain:

  1. There should be 15% remaining space left for the built-in cables, oil pipes, etc. to move freely and not generate tension on the drag chain in the radial direction
  2. Conductors with large diameter differences should be laid separately, with evenly distributed weights, and can be separated by dividers if necessary
  3. When operating at high speeds or frequencies, it is advisable to separate the wires horizontally and avoid overlapping them. It is recommended to use spacers when there are many cables, gas pipes, oil pipes, etc

Alle von uns angebotenen Energieführungsketten haben die CE-Zertifizierung erhalten. Wir sind von unseren Kunden aus der ganzen Welt für unsere robuste Qualität und wettbewerbsfähigen Preis anerkannt. Wir haben unser eigenes professionelles Design-Team kann Ihr technisches Problem zu lösen. Das heißt, wir können jede Art von Energieführungskette nach den Details Ihrer Zeichnung machen. Wir werden gleich hier sein, die für Ihre Anfrage warten.